Get licensed. Stay licensed.
Every licence, certification and code that governs the trades, and what it takes to earn each one.
Start with your state's licence, or pick where you are below. Every record is sourced from the body that issues it.
Where are you starting from?
The credentials that matter change with the job you're in. Here's where each one starts.
I'm getting into a trade
The safety and handling cards employers ask for on day one.
Find training near youI want to move up
Certifications that set a journeyman or master apart and raise your rate.
- NABCEP Board Certified PV Installation Professional (PVIP)PVIP
- BPI CertificationBPI
- RESNET HERS IndexHERS
- LEEDLEED
I run a company
Your contractor licence, plus the federal rules your crew works under.
- OSHA Construction Standards29 CFR 1926
- EPA RRP RuleEPA RRP
- Your state contractor licenceBY STATE
- Insurance, bonding & business licences
Build your Trade Card and this page lists what's next for your trade and level.
The full library
146 credentials, codes and rules, grouped by type. Filter to your trade and level.
Certifications
7Earned credentials that prove a skill and move you up.
- LEED
The most widely used green building rating system, certifying the design, construction, and operation of high-performance buildings.
U.S. Green Building Council (USGBC) / GBCI
- RESNET HERS IndexHERS
The industry-standard score for residential energy efficiency, governed by RESNET.
RESNET (Residential Energy Services Network)
- BPI CertificationBPI
Professional certifications for home energy auditing and building-performance contracting.
Building Performance Institute (BPI)
- NABCEP CertificationNABCEP
The leading certification for solar PV, energy storage, and clean-energy installers.
NABCEP
- BPI Building Analyst Professional (BA-P) and related BPI certificationsBA-P
BPI Building Analyst Professional (BA-P) and related BPI certifications, issued by Building Performance Institute (BPI) (energy).
Building Performance Institute (BPI)
- STCW EndorsementSTCW
International-convention endorsement added to the U.S. MMC, needed for service outside the boundary line.
U.S. Coast Guard
- ABYC Technician CertificationABYC
Voluntary industry certifications from ABYC in areas such as marine electrical, systems, corrosion, and engines and fuel systems.
American Boat & Yacht Council
Regulations
2Federal rules you train for and work under.
- EPA Section 608EPA 608
Federal regulation requiring certification for technicians who handle refrigerants in HVAC systems.
EPA
- EPA RRP RuleEPA RRP
A federal EPA regulation requiring firms and individual renovators to be certified and to follow lead-safe work practices when performing renovation, repair, or painting that disturbs painted surfaces in homes, childcare facilities, and preschools built before 1978. The rule aims to minimize exposure to hazardous lead-based paint dust and reduce childhood lead poisoning.
U.S. Environmental Protection Agency
Licences
3Federal licences. State trade licences are on Licensing by state.
- FAA Mechanic Certificate (A&P)A&P
Federal certificate, with separate airframe and powerplant ratings, that authorizes a mechanic to perform and approve aircraft maintenance under 14 CFR Part 65.
Federal Aviation Administration
- FAA Repairman CertificateFAA Repairman
Employer-tied FAA certificate for a specialist hired by a repair station, commercial operator or air carrier, valid only for that employer's work.
Federal Aviation Administration
- USCG Merchant Mariner Credential (Engineer)MMC
Federal credential and national engineer officer endorsement that U.S.-flag vessel engineers must hold; grades range from Chief Engineer down to limited and designated-duty grades.
U.S. Coast Guard